Monday, October 24, 2011

Pine Cone Wreaths - A Tutorial

After you've reviewed this tutorial, you might want to see some of my new 2015 wreaths here.

I have been making pine cone wreaths for a whole lot of years. I think probably every member of my family has owned one of my Christmas cone wreaths at one time or another.  I enjoy making them and that's probably due in no small part that the supplies are free for the taking!


Here in southeastern Michigan I just take a walk in my neighborhood and pick up cones in the spring when just fallen (or given a little help to fall by me!) - that's when they are freshest and the prettiest color.  I'll share one tip I learned the hard way many years ago: When you bring the cones home stick them in a large garbage bag, spray inside with bug spray and seal up the bag until you're ready to work with them.  You never know what kind of little crawlies are hiding in there! Alternately, if they're the kind of cones that have a lot of sticky sap, or if the cones are not fully open, spread them on a pan covered with foil and bake them in a 200 degree oven for 20-30 minutes. The sap will form a lovely glaze on the cones and the heat will cause the cones to fully open and dry out. (It smells nice, too.)

There's no right or wrong way to make cone wreaths - an online search reveals any number of techniques. Here's the one that works for me.

Supplies
Wire wreath form
Floral wire
Wire cutters
Needle nose pliers
Supply of pine cones
Miscellaneous decorating supplies

 These are the pine cones most commonly found here.  I have other larger cones from other parts of the country but these are my favorites for wreaths.  The two larger cones at the top are the ones I use most often, with the other two used for fill-in.  I've had the little Cone Crafting book for about 20+ years.
 The first thing I like to do is sort some cones by size and height.

Push the cone on to the wreath form, attach the wire to the wreath form and then around the cone near the bottom of the cone.  (Note: I'm showing this on the outside of the form for photo purposes; I actually do the inside layer first, but it's the same technique.)



Wind the wire around the wreath form again and grab another cone. Push the second cone tightly against the first cone so they kind of "grab" each other.  Wind the wire around the second cone just as you did with the first cone.  I use the pliers to pull the wires very tight against the cones and the wreath form.  There's nothing more frustrating then to finish your wreath and find that the cones are loose and slipping out.
Here's the first completed layer on the inside. You can see that the cones are tight against the inside ring of the form.

I then attach the outside layer in the same way.

So far the cones have been placed straight in a line. Now the inside needs filling in, and it gets a little trickier. I place the cones a little more randomly in the middle, some straight up, some on their sides. Sometimes I use the smaller cones seen in the photo above to fill in the blank spaces.
It's a little easier to use an up and down sewing motion with the wires to secure the cones in the middle.


Add a loop of wire to the back for hanging. Here's the final result.

NOTE: If you plan to add a bow to the wreath, leave out two cones on the outside ring where you want to place the bow. Don't forget like I did!

If you're leaving the wreath as is, you can spray the cones with an acrylic sealer, add the bow, and you're done. 

But if you're like me, you want to glam it up a bit.  Use anything you like - garlands, bows, ornaments, glitter, and spray paint.  I'm not quite finished with the wreaths I'm working on right now, but here's a look at some wreaths I've done in the past.

These wreaths are spray painted and glittered, with bead decorations and a bow attached.  My niece owns this pretty in pink wreath. 



I call this one my Martha Stewart wreath - this soft green is one of her favorite colors.
 And that floppy bow - it's SO Martha!


I think this one is my favorite - love the Robin's Egg blue color and the delicate garland trim.



I know these aren't in the usual Christmas colors, but they are different and a nice spark of color.  I'm working on a few more traditional wreaths this year.

Does this inspire you to try a cone wreath if you haven't yet tried it?

Linking up to Sugar Bee Crafts and Today's Creative Blog. Also: Strictly Homemade and Carolyn's Homework.

98 comments:

  1. Yes, this does inspire me! Your wreaths are absolutely gorgeous. Thanks for the tip about how to get the pinecones cleaned. I had never thought to use bug spray or bake them. Cool!

    BTW, you have some beautiful photos in your etsy shop! Love the flower shots :)

    ReplyDelete
  2. Your wreaths are stunning. I love the color on that last one. Great tutorial too.

    ReplyDelete
  3. I have a pine tree that drops the prettiest pine cones in my yard in the fall. Now I know what to do with them. Love the colors you used.

    ReplyDelete
  4. Your wreaths are 'sew' pretty! Thanks for the tip about putting them in the oven. Never would have thought of that, LOL!
    ~Kimberlee at SD

    ReplyDelete
  5. Your wreaths are 'sew' pretty! Thanks for the tip about putting them in the oven. Never would have thought of that, LOL!
    ~Kimberlee at SD

    ReplyDelete
  6. I love your wreaths, Felicia! Thanks for the great tutorial. I might just have to make a few this year!

    ReplyDelete
  7. Your glittery wreaths are beautiful. I love them. I think my favorite is the blue one. I need to find some pinecones to make myself one. Thanks for the inspiration.

    Ruth

    ReplyDelete
  8. These are beautiful! I'm pinning this for sure!

    ReplyDelete
  9. Love it!

    Love for you to link up at:
    "Made by ME" Linky Party at JAQS at http://www.jaqsstudio.com/2011/10/made-by-me-4-linky-party-and-features.html

    ReplyDelete
  10. Definitely inspiring! Beautiful!

    ReplyDelete
  11. These are so beautiful! Do you add the glitter when the spray paint is wet? What kind of glitter do you use?

    ReplyDelete
  12. Do you tie the wire completely around each pine cone? If so how do you get it around when you are working the additional pine cones next to one another? Do you feed it completely around the bottom of the pine cone using the pliers? Are you using a floral wire that is easy to work with? Am I making this harder than it is? I would like to see a few pictures of the wiring process when getting one pine cone next to another. Thank you

    ReplyDelete
    Replies
    1. Hi Cheryl,
      Kind of hard to explain, but I'll try. Yes, I wind the wire almost completely around near the bottom of the cone. But BEFORE I pull it tight, I push it against the wreath form wire and then against the cone next to it. The cones kind of grab each other. Then I use the pliers to pull the wire tight, and wind it around the wreath wire before I add the next cone. As you probably know, the green floral wire comes in several thicknesses and is very strong. I can't tell you which gauge I used since I don't have any on hand right now. You want a wire that is flexible enough, not too thick that it's difficult to work with. Sorry, I don't have any more photos that would illustrate this. Hope this helps. Good luck!

      Delete
  13. Where can I buy one of the wreath skeletons from? I'm in the UK and would love to make one of these for my front door - they're just so unusual!
    Gemma x

    ReplyDelete
  14. Gemma, I buy the wreath forms at two craft supply strores - Joann's and Michael's. I'm not sure which craft stores you have in the UK but that's where you would likely find them. Good luck!

    ReplyDelete
  15. I want to add lights to my wreath do you think I can add them as I go or what do you think? I don't want them to be wrapped around at the end.

    ReplyDelete
    Replies
    1. Shannon, I would not add them as you go. I would create the wreath first, then tuck in the lights in and around the pine cones and hide the cord as best you can.I think that would work. I have had too many instances where the string of lights burned out but was totally wrapped in with the wreath and I had to take everything apart in order to replace the lights. In fact, right now I have a very large evergreen wreath covered with ornaments and trim. One string of lights has gone out and I will have to take it all apart in order to replace it. :( Good luck!

      Delete
  16. Do u add the glitter while spray paint I s wet or do I have to get sone kind of spray glue? Thanks

    ReplyDelete
  17. Hi Tricia,
    I let the paint dry and then I use spray glue for the glitter. I found that if I tried to sprinkle the glitter on the paint it tended to sink into the paint and wasn't quite as "glittery." Hope that makes sense! By the way you don't need any special kind of spray glue - any kind will work for the glitter. And work in sections when you do it so the glue doesn't dry too quickly.

    ReplyDelete
  18. Great tutorial. Was collecting pine cones while on holiday so no excuse for not trying to make one. Thank you for posting.
    Love all of them.
    Deirdre

    ReplyDelete
  19. http://www.amazon.com/Wire-Wreath-Frame-12-Green/dp/B004BPTGUU
    Where do you buy frame in this tutorial? Is it 12" or bigger?
    A great tutorial!

    Pierre

    ReplyDelete
    Replies
    1. Hello Pierre,
      The frame on Amazon is exactly the kind I use, but I use the 18" size. You can use a 12", it will just be smaller wreath. I usually buy my frames at my local craft stores. We have Joann's and Michael's here in Michigan. Thank you - I'm happy you like my tutorial.

      Delete
  20. what did you use for the frosted effect? spray on?

    ReplyDelete
    Replies
    1. It's all glitter, not fine glitter but coarse glitter. I used spray glue then sprinkled the glitter on.

      Delete
  21. These are so pretty. I love the green one. My favorite. Thank you for sharing these. : )

    ReplyDelete
  22. Thanks, Ellaruth. I love making these. In fact, I have been making some for the last few weeks but they are being sold to friends before I can even list them in my etsy shop! I'm going to post some here as soon as I get a minute.

    ReplyDelete
  23. This comment has been removed by a blog administrator.

    ReplyDelete
  24. HI Felicia, about how many cones do you use to fill in a whole wreath? I saw online how you can bleach pine cones too, I am good g to try that and male a wreath from your fantastic tutorial. Thanks so much.

    ReplyDelete
  25. Hi Lisa, thanks for visiting. That's a tough question to answer - it depends on the size of the wreath form and the size of the cones. I never counted, but it appears an 18" form would take anywhere from 80-100 medium to large cones, and if I use tiny cones for fill-in they would probably be around 30 or so. The good thing about pine cones is that they are usually free for the picking!

    ReplyDelete
  26. Love your wreaths! Do you spray paint the whole wreath after its put togetehr or spray the individula cones before assembling?

    ReplyDelete
  27. Have you used the screw-in eyes to wire your cones to the frame? The eyes screw into the bottom of the pine cone and provide an attachment for the wreath.

    ReplyDelete
    Replies
    1. I have used screw-eyes on pine cones for other projects where the pine cones hang, such as for a swag. However, I don't believe they would work to hold on as well to the metal wreath frame. The wrapping method I use securely attaches the cone to the frame, as well as pulling it tight to the adjacent cones and the frame itself.

      Delete
  28. I had no idea you could make a wreath with pine cones!! I love this idea! I found your post on Pinterest, and I think I want to try this next year. This year, I only have pine cones and no money for the rest of the supplies....but next year, this is happening! :-)

    ReplyDelete
    Replies
    1. Thank you, Juana! You must try it next year - you'll love it!

      Delete
  29. Is it better to paint your cones before you assemble the wreath? or just glam it all up with paint/glitter after it's been all assembled?

    ReplyDelete
    Replies
    1. Thanks for your question, Mrs. Porter. I prefer to assemble the wreath first and paint and glitter the wreath afterward. I would be afraid that if you painted the cones first, with all the twisting and handling of the cones while assembling the wreath you would very likely scratch off some of the paint and the cones would get a little beat up. I suppose you could always touch it up afterward. That being said, there's no law that says you can't paint them first. If you try it, let me know how it works out.

      Delete
  30. Thank you for this very informative and easy to follow tutorial. Your wreaths are absolutely gorgeous! Do you think it would be possible the next time you make one to post pictures of the backside of each completed step? I tried making a pine cone wreath and became frustrated with not being able to get the cones to stay on the frame, so I gave up. Needless to say, I have several bags of cones that I don't want to throw away. Any tips will be very appreciated.

    ReplyDelete
  31. Evelyn, thanks for writing. That's a good idea to post pictures of the backside of the wreaths. I'll have to remember that for the next time. I found that the key to get the cones to stay on the frame is to really push them hard into each other and to the frame, and to pull the wires around the cones very TIGHT. That's why I use the pliers to pull them. I hope you won't give up. The first wreaths I made several years ago were pretty pitiful! But they got better.

    ReplyDelete
  32. This is the best tutorial I have found. It takes time and patience, but the quality of the attachment is superb. I like the cones natural, and add buckeyes from my farm. I pick up the cones from behind a warehouse. They are dormant when I get them after the first frost, so I keep them inside for a while so they open up. No bug issues. after it's finished, I poly the whole thing and top it with a muted gold bow. I don't do bling. My name is Karen and I live in Upper Arlington, Ohio. Thank you so much for this post!

    ReplyDelete
    Replies
    1. Karen, thank you for your kind words. I too like the natural look, and also leave them natural sometimes.(In fact, I'm working on some rustic grapevine wreaths right now!) I have also occasionally added nuts and acorns when I can find them. I like to pick my cones up in the spring when they are the freshest and prettiest. I would love to see some of your wreaths when you have them finished. Feel free to send me a photo if you like. Thanks again.

      Delete
  33. I love this tutorial. I hope to make a wreath for myself, and also hope it will come out half as good as yours. They are beautiful!

    ReplyDelete
    Replies
    1. Donna, thank you so much for your kind words. I hope you will try it - it's a bit addicting! I'm suffering withdrawal now because I'm out of cones and have to wait til spring to collect more. Please let me know how your wreath works out.

      Delete
  34. Ok so I need to soak them first or bake them ? And if so do I just soak on water and how long then air dry or oven and if oven what temp & how long ? Also I understand the glitter part. But you also spray paint cones after you put them on correct ? Hand you ever painted cones and then make wreath so you can have different colors ?

    ReplyDelete
  35. My name is Lynette it says Unknown sorry

    ReplyDelete
    Replies
    1. Hi Lynette,
      Thanks for your questions. I'll attempt to answer best I can. First, I do NOT soak the cones. It's not necessary. Just put them in a 200 degree oven for about 20-30 minutes. This will dry them out if they have any moisture in them and it will kill any critters that might be on the cones. The cones you see in this post are sprayed after I have put the wreath together. I prefer this method; it's easier than spraying individual cones and I think it makes the wreath look more complete since it also colors the wreath form itself.
      I have done some wreaths with cones that were different colors. I just dusted the cones with spray paint for a softer look then put the wreath together. There's some samples in this post. http://feliciakramer.blogspot.com/2015/11/wreaths-wreaths-and-more-wreaths.html


      I hope this helps. Let me know if you have any more questions. Thanks for visiting!

      Delete
  36. These are absolutely beautiful. Thanks for sharing the tutorial :)

    ReplyDelete
  37. These are absolutely beautiful. Thanks for sharing the tutorial :)

    ReplyDelete
    Replies
    1. Thank you for visiting and for the nice compliment, Susan. I very much appreciate it!

      Delete
  38. Thanks for sharing your tips and photo's. You give really good explanation's on making the pine cone wreaths. I made these back in the 70's and now that I'm retired am planning on giving this a go once again. My sister in law just retired her's that I made in the 70's last year. Making well takes time but pays off!

    Wonderful blog post and writing. Thank you Felicia!

    ReplyDelete
    Replies
    1. Karen, thanks for your kind words. Made my day!! Would love to see the wreaths you make!

      Delete
  39. Hi Felicia, Are you keeping the wire one the roll while you are attaching to the form or are you cutting pieces of wire? If yes, how long would you recommend so I can prep

    ReplyDelete
  40. Hi Mary Beth, thanks for visiting. I cut the wire off the roll. I never measured, but I'm guessing I cut about an 18-24" piece. That's usually enough to attach 3-4 cones to the wreath and then tie them off to the wire form. If it's your first time making the wreath, I would cut just a few and see how they work, then you can adjust shorter or longer for whatever is comfortable for you. Would love to see one when you finish. Thanks again and good luck!

    ReplyDelete
  41. wow, your wreaths are gorgeous. I love the natural look for them. I have made Christmas baskets in the past for friends using pinecones. I would lughtly spray paint them, add some glitter and lights, and then some Christmas decorations. Friends and family loved them. Maybe I should start again.

    ReplyDelete
  42. wow, your wreaths are gorgeous. I love the natural look for them. I have made Christmas baskets in the past for friends using pinecones. I would lughtly spray paint them, add some glitter and lights, and then some Christmas decorations. Friends and family loved them. Maybe I should start again.

    ReplyDelete
  43. Hi grannydid, Thanks for your kind comments. I have never made a basket with pinecones but would love to know how! If you get back do doing them again, please let me know. I would love to know how and perhaps feature you on my blog. Thanks again!

    ReplyDelete
  44. Hello, do you recommend a certain gauge for the floral wire and could you explain how to attach the pine cones in greater detail? I am pretty crafty/handy but I can't get the pine cones to sit right. I have watched a few videos and read many tutorials and I can't seem to get the hang of it! Thanks! BTW, you're wreaths are lovely!

    ReplyDelete
    Replies
    1. Hi Jessy, Your questions reminded me once again that I'm trying to find the time to educate myself so that I can do a video of these steps! It's a little difficult to describe in words. First of all, I use 24 gauge florist wire. It's strong enough to hold the cones but not so stiff that it hurts my hands to work with it. If you look closely at the photos above, I start about two thirds of the way down the cone and push it hard against the wire form. I then wrap the wire around the cone, then around the wire form, then I use the pliers to pull the wire really tight. With the next cone, push it tight again against the wire form, then sideways into the other cone so they grab each other. I pull everything really tight while I work, using the pliers rather than stressing my hands. That's the best I can describe it. I will also admit that once I have completed the wreath and find that a few cones are a little loose, I'll use a dab of hot glue to secure them better. I seldom have to do this, but it's a good fallback position. Stay tuned - I am trying to find the time to put together a video and will announce it with this post and in my etsy shop (www.etsy.com/shop/morebrightideas). Thank you so much for your kind comments and good luck!

      Delete
  45. Hi, could this be done by just glueing the cones together instead of wiring, many thanks :-) :-)

    ReplyDelete
  46. Hi, could this be done by glueing instead of wiring,wondering because this would be fab to do as my daughter works with children

    ReplyDelete
    Replies
    1. Hi Shaz,
      Although I occasionally reinforce the cones in my wreaths with a dab of glue, I have never done an entire wreath with glue instead. Are you talking about hot glue, or some other liquid glue? Hot glue wouldn't be recommended with children and you would have to use an awful lot of glue to hold the cones. A liquid glue would be difficult because the cones would have to be held in place until it dries. In either case, I do not believe glues would hold the cones well enough and they would not stand the test of time. Your daughter might want to consider using individual pine cones as Christmas tree ornaments. If you do a search I'm sure you'll find lots of examples. Thanks for visiting. Good luck!

      Delete
  47. How do you attach the inner ring of cones?

    ReplyDelete
  48. I'm in the process of making one. I diffenetly wouldn't hot glue these on as they could fall off. It's taking me more than an hour to make this but i don't mind. I have plenty of time. I love the blue and pink ones. I suppose you bought the bead decoration on the blue one at Michaels or Joann Fabric? From the pictures on those 2 it looks frosted which i really like. What brand of glitter did you use? I made some really cute pine cones trees. Very large pine cones painted green then added battery operated rice lights and garland.

    ReplyDelete
    Replies
    1. Good for you! I agree about the glue. Actually,I bought the blue bead decoration in a gift shop somewhere when I was on vacation. I love it, and have looked for it or something similar ever since with no luck. I have just one piece left that I use on my own tree. Wish I could find it again! I do usually buy my trim at Michael's or Joann's. As far as the glitter goes, I believe that was Joann's glitter. It's "chunkier" so it does look more like frosted. Just look for glitter that has bigger pieces. On other projects I like Martha Stewart extra fine glitter. Your pine cone trees sound great! Would love to see a picture. Thanks for stopping by - I appreciate it!

      Delete
    2. Can't figure how i would get a picture in here. Any ideas

      Delete
    3. Hi Catherine, I'm the only one that can post on my blog. You can email a photo to me and I can post it myself. Here's my email: a-b-i@comcast.net. Thanks!!

      Delete
    4. Sent you an email with a pic of the pine cone trees. Hope i picked the right one. Will email a pic of wreath when done

      Delete
    5. I replied to your email. Thanks!

      Delete
  49. I am so impressed and now inspired! Beautiful work! Love the colored ones, I wouldn't have thought of that. I have pine trees all around my property. I'm gathering them tomorrow and making one of your wreaths. I'm going to paint mine red glitter! thank you for the wonderful tutorial:)

    ReplyDelete
    Replies
    1. Thank you so much! A red glitter wreath will be beautiful! I would love to see it when you finish.

      Delete
  50. Beautiful work... can you please explain "use an up and down sewing motion with the wires to secure the cones in the middle." I am unfamiliar with this motion. Thank you, Julia


    ReplyDelete
    Replies
    1. Hi Julia, I know - it's hard to explain. What I mean is - once you have cones attached all around the outside ring and the inside ring, there's very little room left in the middle to attach the cones. So I attach a strip of wire to the ring, bring the wire up from underneath, wrap it around the cone, and then thread the wire straight down, wrap the wire around the ring, and pull the cone tight. Then come up again from underneath for the next cone. Kind of like sewing a button on! I hope this clarifies my method.

      I'm trying to find the time to do a video tutorial. I promise to try and get that done soon! Thanks for visiting!

      Delete
  51. Would you happen to have the ISBN # for the Cone Crafting book by Don R. Crate?
    I would like to look at it in ky library but cannot find it.
    TIA and Happy Crafting!

    ReplyDelete
    Replies
    1. Hi Dorothy, the ISBN is 0-940654-00-8. It was published in 1980. I tried unsuccessfully to find it online with no luck. I think if you try again at the library for a similar book you'll be okay. This book describes the different species of cones and gives a few simple pine cone crafts. For instance, their instructions for a wreath are very similar to my technique in this tutorial. I'm sure there are other nature craft books that will give you the same or similar information. Good luck and thanks for visiting.

      Delete
  52. Finished the wreath and i love it. Had to go back to Michael's to get more moss. I took some pictures but i think i need to take pictures outside. I don't think the lights will show outside but i'll find out. Now i'll have to buy a wreath container to store. Hope i can find one big enough. Your pictures are really nice. Did you take them or someone else?

    ReplyDelete
  53. Added a picture of the wreath i made on the tried it thingy. I found i had a wreath holder with red on it and it was perfect. i kept looking at it saying it needs something so i added 3 pine cones of varying lengths to hang in the middle. I'll try and take a picture of it as i haven't put it away yet. Made a kissing ball with pine cones and it came out so pretty. So i was looking for something to hang in the window that has blue curtains so i decided to make a kissing balls with blue frosted berries. I used artificial pine but ran out so will have to finish when i can buy some more. I'll have to collect some more pine cones this summer or buy some on line.

    ReplyDelete
    Replies
    1. Hi,Catherine, Nice to hear from you again. You've been busy - your projects sound lovely! I hope to see photos some day. Thanks for stopping by.

      Delete
  54. Love your pine cones,always have them in a basket but seeing yours I am going to try a few they are so beautiful.Thanks for the tutorial easy to understand.

    ReplyDelete
    Replies
    1. Hi Ellen, Thanks for visiting. I hope you do try a wreath with your pine cones - go for it!!

      Delete
  55. What are the approximate sizes of the pinecones you use? My girls and I have been collecting various sizes and to make wreaths for presents this year.. Not sure the best sizes to work with. Love your site!

    ReplyDelete
    Replies
    1. Hi Kimberly,
      Thanks for visiting. The cones I generally use range from about 1-1/2" to 3-1/2". I find that size the easiest to work with. As I mention in the above tutorial, I generally sort them by size and use the larger ones on the inside and outside ring, then smaller ones in the middle. Hope that helps!

      Delete
    2. Yes it does! Thank you so much.. We have bags of pinecones cones that we collected and most are WAY too big. I think we will sort them and keep some of the big ones to make ornaments and a few other crafts and then sell the rest so that my daughter can make money for girl scout camp.

      Delete
  56. Went thru pine cone withdrawal during the winter. I found a great supply of pine cones in my home town. I also found some small ones, about 1 to 1 1/2 inch to make kissing balls with which i will glue onto styrofoam balls. I love the small ones. Don't know what kind of pine tree it's called but it looks different from a regular pine tree. Found a quite a few of these trees loaded with cones. Tried to pull them off which just hurt my hands. Had to wait (hate waiting) for them to fall off or after a windy day. These seem to fall off during the summer or maybe i'm confused and most of them will fall off in the fall. Now i'm loaded with pine cones. I'm bored so i'll start making pine cone wreath now as a Christmas gift for a friend.

    Have a question about spray painting the cones. I know i have to spray them after the wreath is put together but how did you get such an even coat of paint and get into the little crevices?

    ReplyDelete
  57. Hello again, Catherine!
    As far as when the pinecones fall, here in Southeast Michigan I go searching for them in late spring, especially after a windy day. That's when they're coming down here and since they are still fresh they're a nice caramel color and not yet "buggy." I don't have any trouble with getting the spray paint to cover the cones after the wreath is put together. You might want to do 2-3 light coats with some drying time in between, and paint the backside first. Then just keep moving the paint can to get into all the little crevices. It works!

    I have two favorite brands. Design Master, is a spray intended for artificial flowers. This gives a softer look but doesn't cover real well at first so for sure you would need more than one coat. My other favorite spray paint for just about everything is Rustoleum Painters Touch 2X Ultracover Paint and Primer, and I mostly prefer a Satin or Flat finish. Again, though, there are no rules. I recently sold a Christmas wreath painted in Gloss Red! Experiment and do what you like. Your projects all sound great! Would love to see photos some day. Thanks for visiting.

    ReplyDelete
  58. I have often wanted to work with pine cones and make a wreath. Thank you so much for your step by step on how to attach to the frame. I have no floweral experience so l was just going to hot glue the cones to the frame. Now, l can follow your steps and know they wont be falling off ! Your wreaths are wonderful. I must admit, the blue is my favorite as well. Keep up the great work and looking forward to seeing more pictures of your work.

    ReplyDelete
    Replies
    1. Hi Country Girl,
      Thanks for visiting and for your kind words. Please do try the wired wreath. I know from past experience that the hot glue just won't hold over the long term. But tied tightly, the wired cone wreath will last a very long time. I hope you will make your wreath, and when you do I would love to see pictures!! Good luck and thanks again.

      Delete
  59. Making another wreath and i am wrapping the wire twice around the pine cones for added strength as the person i'm giving this wreath to isn't the most careful person. As for the middle cones i find it easier to wrap the wire around the cones then slide the wire to the back of the frame and tie it to the frame. On my first wreath i individually wired each cone to the frame but i'm trying your way to use less wire and for a neater back. On the back of the frame wrapped the loose wires to each other to neaten it up and to prevent me from getting cut from the loose wires.

    On the pine cones i noticed a papery, brown thingy (don't what it's called) so i'm brushing them off in case i spray paint it. My thinking it that if i leave them on some would fall off then there would be a bald spot. I'm using small wire brushes to get them off. What a pain. Did you get rid of most of the papery thingies before spray painting?

    ReplyDelete
    Replies
    1. Hello again, Catherine,

      I truly believe whatever works for you when making your wreaths is what's best for you! :) Sounds like yours are very sturdy. Good for you!

      Those papery brown things are scales, and at the ends are the pine seeds. I find if there's any left on the cones I pick up (you are supposed to fly away and plant yourselves somewhere, you silly seeds!), they'll fall off themselves with handling or I shake them off. I don't worry if there's some still on there when I spray paint because they get painted too, and usually end up sticking to the cone well enough. I'm happy to hear you are continuing on with your wreath-making.

      Delete
  60. Hi, I'm not sure how to add a new comment. My name is Gayle and I love your wreaths! I'd love to try making a pinecone wreath and spray painting it purple. Can you recommend what brand of spray paint to use?

    ReplyDelete
  61. Hi Gayle, I had to start moderating comments because I was getting a lot of spam. Sorry! To answer your question, I use Design Master Colortool Spray. It's a satin finish and has a nice soft effect. I sometimes use Rustoleum Painter's Touch UltraCover. It comes in flat, satin, and gloss so it depends on the effect I want. Rustoleum is available at the big box stores and some craft stores, Design Master is usually available at craft stores. Thanks for checking in. Good luck with your wreath.

    ReplyDelete
  62. The name is Cathy lol. I just finished mine and they are beautiful. Thank you.

    ReplyDelete
    Replies
    1. Yay for you, Cathy - you did it! I would love to see pictures if you get a chance. Thanks!

      Delete

I'm interested in what you have to say. Join the discussion:

Related Posts with Thumbnails